Thermal Management Materials 1.5W Silicone thermal gap pad for Chip heat dissipation
Company profile
Dongguan Zhaoke Electronic Material Technology Co., Ltd. was established in 2006. Is a high-tech enterprise specializing in the research, development, production and sales of thermal interface materials. We mainly produce: heat-conducting joint filler, low melting point thermal interface materials, heat-conducting insulator, heat-conducting adhesive tape, heat-conducting interface pad and heat-conducting grease, heat-conducting plastic, silicone rubber, silicone rubber foam, etc. We adhere to the business philosophy of "survival by quality, development by quality", and continue to provide the most efficient and best service for new and old customers with excellent quality in the spirit of rigor, pragmatism and innovation.
Certifications:
ISO9001:2015
ISO14001: 2004 IATF16949:2016
IECQ QC 080000:2017
UL
Product introduction
The TIF1120--15-02S Series is recommended for applications that require a minimum amount of pressure on components. The viscoelastic nature of the material also gives excellent low-stress vibration dampening and shock absorbing characteristics. Ziitek TIF1120-15-02F is an electrically isolating material, which allows its use in applications requiring isolation between heat sinks and high-voltage, bare-leaded devices.
TIF100-02S Datasheet-REV02.pdf
Features
● RoHS compliant 1.5W/mK
● UL recognized
● Fiberglass reinforced for puncture, shear and tear resistance
● Supplied with protective liners for ease of use
● Electrically isolating
● High durability
Applications
● Cooling components to the chassis of frame
● High speed mass storage drives
● Heat Sinking Housing at LED-lit BLU in LCD
● LED TV and LED-lit lamps
● RDRAM memory modules
● Micro heat pipe thermal solutions
● Automotive engine control units
| Typical Properties of TIF1120--15-02S Series |
| Color | gray | Visual | Composite Thickness | hermalImpedance
@10psi
(℃-in²/W) |
| Construction &
Compostion | Ceramic filled silicone elastomer | *** | 10mils / 0.254 mm | 0.48 |
| 20mils / 0.508 mm | 0.56 |
| Specific Gravity | 2.3 g/cc | ASTM D297 | 30mils / 0.762 mm | 0.71 |
| 40mils / 1.016 mm | 0.80 |
| Heat Capacity | 1 l/g-K | ASTM C351 | 50mils / 1.270 mm | 0.91 |
| 60mils / 1.524 mm | 0.94 |
| Hardness | 45±5 Shore 00 | ASTM 2240 | 70mils / 1.778 mm | 1.05 |
| 80mils / 2.032 mm | 1.15 |
| Tensile Strength | 40 psi | ASTM D412 | 90mils / 2.286 mm | 1.25 |
| 100mils / 2.540 mm | 1.34 |
| Continuos Use Temp | -40 to 160℃ | *** | 110mils / 2.794 mm | 1.43 |
| 120mils / 3.048 mm | 1.52 |
| Dielectric Breakdown Voltage | >5500 VAC | ASTM D149 | 130mils / 3.302mm | 1.63 |
| 140mils / 3.556 mm | 1.71 |
| Dielectric Constant | 4.5 MHz | ASTM D150 | 150mils / 3.810 mm | 1.81 |
| 160mils / 4.064 mm | 1.89 |
| Volume Resistivity | 1.0X10¹²" Ohm-meter | ASTM D257 | 170mils / 4.318 mm | 1.98 |
| 180mils / 4.572 mm | 2.07 |
| Flame rating | 94 V0 | equivalent UL | 190mils / 4.826 mm | 2.14 |
| 200mils / 5.080 mm | 2.22 |
| Thermal conductivity | 1.5 W/m-K | ASTM D5470 | Visua l/ ASTM D751 | ASTM D5470 |
Standard Thicknesses:
0.010" (0.25mm) 0.020" (0.51mm) 0.030" (0.76mm) 0.040" (1.02mm) 0.050" (1.27mm)
0.060" (1.52mm) 0.070" (1.78mm) 0.080" (2.03mm) 0.090" (2.29mm) 0.100" (2.54mm)
0.110" (2.79mm) 0.120" (3.05mm) 0.130" (3.30mm) 0.140" (3.56mm) 0.150" (3.81mm)
0.160" (4.06mm) 0.170" (4.32mm) 0.180" (4.57mm) 0.190" (4.83mm) 0.200" (5.08mm)
Consult the factory alternate thickness.
Standard Sheets Sizes:
8" x 16"(203mm x 406mm)
TIF™ series Individual die cut shapes can be supplied.
Peressure Sensitive Adhesive:
Request adhesive on one side with "A1" suffix.
Request adhesive on double side with "A2" suffix.
Reinforcement:
TIF™ series sheets type can add with fiberglass reinforced.
Ziitek Culture
Quality :
Do it right the first time, total quality control
Effectiveness:
Work precisely and thoroughly for effectiveness
Service:
Quick response, On time delivery and Excellent service
Team work:
Complete teamwork, including sales team, Marketing team, engineering team, R&D team, Manufacturing team, logistics team. All is for supporting and servicing a satisfy service for customers.
FAQ:
Q: Are you trading company or manufacturer ?
A: We are manufacturer in China.
Q: How long is your delivery time?
A: Generally it is 3-7 work days if the goods are in stock. or it is 7-10 work days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra cost?
A: Yes, we could offer samples free of charge.
Q: How do I place an order?
A:1. Click the "Sent messages" button to continue with the process.
2. Fill out the message form by entering a subject line, and message to us.
This message should include any questions you might have about the products as well as your purchase requests.
3. Click the "Send" button when you are finished to complete the process and send your message to us
4. We will reply you as soon as possible with Email or online
Product Tags:
|
|
Thermal Management Materials 1.5W Silicone thermal gap pad for Chip heat dissipation Images
|
